Canon EOS Rebel T5i 18-55mm IS STM Lens Kit 手册

下载
页码 388
172
Live View Shooting Cautions
Shooting Result
 
If you take the picture in magnified view, the exposure may not come out 
as desired. Return to the normal view before taking the picture. In 
magnified view, the shutter speed and aperture will be displayed in 
orange. Even if you take the picture in magnified view, the image will be 
captured in the normal view.
 
If [z2: Auto Lighting Optimizer] (p.125) is not set to [Disable], the 
image may look bright even if a decreased exposure compensation or 
decreased flash exposure compensation is set.
 
If you use a TS-E lens (other than the TS-E17mm f/4L or TS-E24mm 
f/3.5L II) and shift or tilt the lens or use an Extension Tube, the standard 
exposure may not be obtained or an irregular exposure may result.
Live View Image
 
Under low- or bright-light conditions, the Live View image may not reflect 
the brightness of the captured image.
 
If the light source within the image changes, the screen may flicker. If this 
happens, exit Live View shooting and resume shooting under the actual 
light source.
 
If you point the camera to a different direction, it may throw off the Live 
View image’s correct brightness momentarily. Wait until the brightness 
level stabilizes before shooting.
 
If there is a very bright light source in the picture, the bright area might 
appear black on the LCD monitor. However, the actual captured image 
will correctly show the bright area.
 
In low light, if you set the [52: LCD brightness] to a bright setting, 
chrominance noise may appear in the Live View image. However, the 
chrominance noise will not be recorded in the captured image.
 
When you magnify the image, the image sharpness may look more 
pronounced than in the actual image.
Custom Functions
 
During Live View shooting, certain Custom Function settings will not take 
effect (p.297).
Lens and Flash
 
The focus preset function is possible for Live View shooting only when 
using a (super) telephoto lens equipped with the focus preset mode 
marketed since the second half of 2011.
 
FE lock is not possible when the built-in flash or an external Speedlite is 
used. Modeling flash will not work with an external Speedlite.