Canon CXDI-50RF Digital Radiography System 规格指南
Product Specifications
© 2015 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
Static Detector
Method
Method
Flat Panel Detector, Scintillator & Amorphous Silicon (a-Si), RF System
Cassette
Cassette
Scintillator
Csl (CsI: TI)
Sensor
LANMIT (Large Area New-MIS Sensor and TFT)
Pixel Pitch
160 Microns
Pixels
2,208 x 2,688 Pixels (Approximately 5.9 Megapixels)
Imaging Area
Automatic Sizing Up to 14 x 17 in (35 x 43 cm)
Standard
Components
Sensor Unit, Power Supply
Dynamic Detector
Binning Mode
1 x 1, 2 x 2
Acquisition Mode
Up to 30 fps
Cooling
Active Air Cooling
Image Acquisition and Processing
Image Processing
MLT(S) (Static)
Recursive Filters and Multi-Frequency Filters (Dynamic)
Recursive Filters and Multi-Frequency Filters (Dynamic)
A/D
14-bit
Grayscale
4,096 Grayscale (12-bit)
Preview Image
Approximately 2-4 Seconds After X-ray Exposure (Radiography Only)
Full Image Display Approximately 4 Seconds After X-Ray Exposure (Radiography Only)
Data Output and Network Connection
Network
Data Output and Network Connection
Network
Ethernet 10/100/1000 Base T, RJ45 Standard, Wireless Optional
DICOM
DICOM 3.0 Compatible, Print Management Service Class (SCU),
Storage Service Class (SCU)
Storage Service Class (SCU)
Electrical and Environmental
Voltage
AC 100-240V 50/60Hz
Operating
Environment
Sensor Unit: 41-95 F (5-35 ºC), Humidity 30-75% RH (non-condensing)
Physical Characteristics
Dimensions (W x L x
H)
19.4 x 19.8 x 1.0 in (493 x 503 x 26 mm)
(Detector unit only)
(Detector unit only)
Weight
12.5 lbs (5.7 kg)
Specifications are subject to change without notice.