Canon HJ18ex28B IASE A 手册
E125
4. Operation in Full Mode
[ I-Gain ]
Iris
Remote:
90
Auto:
50
[ ]
[ I-Gain ]
Iris
Remote:
90
Auto:
55
[ ]
Iris
[ ]
[ I-Gain ]
Torque:
High
Comp:
ON
[ I-Gain ]
Iris
Remote:
90
Auto:
50
[ ]
[ I-Gain ]
Iris
Comp:
ON
Torque:
High
[ ]
[ I-Gain ]
[Trk]OFF
Shtl
VTR
A 1
V
[ ]
MENU
1
A
Fr1P
[ Basic ]
Specifying Iris Gain
(1) Specifying Auto Iris Gain
Top
Although this value is factory-set, it can be adjusted as needed.
To adjust the value, use either the auto iris gain adjustment trimmer (refer to the Lens Manual) or display operations. Regardless
of the method of adjustment used, the most recent setting takes precedence.
The same auto iris gain value applies to all users, regardless of the current user. Thus, there is no need to switch users in
advance. Unlike most other setting adjustments, any changes to this setting also apply to user 0.
To adjust the value, use either the auto iris gain adjustment trimmer (refer to the Lens Manual) or display operations. Regardless
of the method of adjustment used, the most recent setting takes precedence.
The same auto iris gain value applies to all users, regardless of the current user. Thus, there is no need to switch users in
advance. Unlike most other setting adjustments, any changes to this setting also apply to user 0.
Note: Do the following when
adjusting gain while checking
iris operation.
iris operation.
→ Confi rm that the drive unit A/M
switch is set to [Auto] mode.
→ Set the camera iris mode to
[Auto].
Note: As you look at the lens iris
ring, set it to the position of
maximum gain at which “focus
hunting” does not occur.
maximum gain at which “focus
hunting” does not occur.
Note: The current iris gain value
is retained even if you reset
other settings as described in
“4.2.1 Resetting Values.” For
this reason, you will no longer
be able to view the default
setting. If necessary, make
a note of the default setting
before adjusting this value.
other settings as described in
“4.2.1 Resetting Values.” For
this reason, you will no longer
be able to view the default
setting. If necessary, make
a note of the default setting
before adjusting this value.
Press
once and
three times.
The display switches to the Iris screen.
Press
.
[I-Gain] is underlined.
Press
.
The display switches to the [I-Gain] screen.
Press
.
The display reverts to Screen A.
Press
.
[Auto] is underlined.
The previous or default value is
highlighted.
highlighted.
Press
or
.
Press left or right until you reach the desired function.
Initial Top Screen
Iris Screen
Screen A
[I-Gain] Screen
Options
01
to
99
Default: Varies depending on the factory-set value, but corresponds to
the value determined with the iris gain adjustment trimmer.
Description
Minimum gain
Maximum gain
MENU
× 3
Iris
[ ]
or
1
2
3
4
5
6