Canon HJ18ex28B IASE A 手册
E75
4. Operation in Full Mode
1
MENU
Menu screen
See “4.2 Confi guration from the Menu Screen.”
8
V
VTR switch
By default, the VTR switch for a drive unit is
assigned to the {VTR} function, but it can be
reassigned as needed.
assigned to the {VTR} function, but it can be
reassigned as needed.
See “4.1.9 Assigning Functions to the VTR
Switch.”
Switch.”
2
[ ] User
Adjust settings for up to ten users (0–9), to
distinguish settings by user. Switch users
from this screen, either to use or change the
settings.
distinguish settings by user. Switch users
from this screen, either to use or change the
settings.
See “4.1.3 Switching Users.”
9
A 2
AUX2 switch
By default, the AUX2 switch for a zoom
demand is assigned to the {Frame Preset 1}
function, but it can be reassigned as needed.
demand is assigned to the {Frame Preset 1}
function, but it can be reassigned as needed.
See “4.1.10 Assigning Functions to the AUX2
Switch.”
Switch.”
3
[Basic] Switching to Basic Mode
Switch to Basic mode as needed.
See “4.1.4 Switching to Basic Mode.”
10
R
RET switch
By default, the RET switch for a drive unit is
assigned to the {Return} function, but it can be
reassigned as needed.
assigned to the {Return} function, but it can be
reassigned as needed.
See “4.1.11 Assigning Functions to the RET
Switch.”
Switch.”
4
[Trk] Zoom tracking
Switch to ON when using zoom tracking.
See “4.1.5 Zoom Tracking ON/OFF.”
11
[I-Tq] Iris torque
Adjust the level of torque in manual control of
the iris ring as needed.
the iris ring as needed.
See “4.1.12 Specifying Iris Torque.”
5
A
AUX switch
By default, the AUX switch for a drive unit is
assigned to the “Frame Preset 1” function, but
it can be reassigned as needed.
assigned to the “Frame Preset 1” function, but
it can be reassigned as needed.
See “4.1.6 Assigning Functions to the AUX
Switch.”
Switch.”
12
[Z.M.] Zoom curve mode
Adjust zoom speed in response to pressing
the zoom seesaw switch or tilting the analog
demand thumb ring.
the zoom seesaw switch or tilting the analog
demand thumb ring.
See “4.1.13 Specifying Zoom Curve Mode.”
6
[I-Gain] Iris gain
Adjust the auto iris gain or the remote iris gain
value as needed.
value as needed.
See “4.1.7 Specifying Iris Gain.”
13
AM
Iris A/M switch
Adjust movement of the iris A/M switch on the
drive unit.
drive unit.
See “4.1.14 Specifying Iris A/M Switch.”
7
A 1
AUX1 switch
By default, the AUX1 switch for a zoom
demand is assigned to the {Shuttle} function,
but it can be reassigned as needed.
demand is assigned to the {Shuttle} function,
but it can be reassigned as needed.
See “4.1.8 Assigning Functions to the AUX1
Switch.”
Switch.”
14
Seesaw
Enable iris control using the zoom seesaw
switch.
switch.
See “4.1.15 Assigning Functions to the
Seesaw.”
Seesaw.”