Canon EOS C300 Mark II 手册

10

Camera Access Point Connection

 

Enter the encryption key (password) the camera 
will use as a Wi-Fi access point using the 
keyboard screen.

 

The encryption key (password) is needed to 
connect the Wi-Fi enabled device to the camera. If 
necessary, write it down.

 

After confirming the encryption key (password), 
continue with the procedure to configure the IP 
address assignment (A 16).

When the monitor unit is attached to the camera and the LCD screen is used, the full 
keyboard screen will appear on the screen. When the monitor unit is not attached to the 
camera, a simplified screen for entering text will appear on the viewfinder.

1 Use the joystick to select a character and 

then press SET to add it.
• On the full keyboard: Push the joystick up/

down/left/right to select the desired 
character and press SET to enter it. Use 
the arrows ( / // ) to change the 
position of the cursor and the backspace 
character (

) to delete the last 

character entered. You can also press the 
MENU button to delete the last character.
On the simplified screen: Push the 
joystick up/down or turn the SELECT dial 
to select the desired character and press 
SET to enter it.  Press the MENU button to 
delete the last character.

• If you are entering sensitive information, 

like a password, the character you 
entered will change to “z” after a moment 
to protect the password.

• Repeat this step as necessary to enter the 

desired text.

2 After entering the desired text, select [OK] in the full keyboard, or [Set] in the simplified 

screen, and then press SET to close the keyboard screen.

Current character / Character limit

Full keyboard on the LCD screen

Simplified screen