Canon EOS Rebel T6 EF-S 18-55mm IS II Kit 手册

75

Using AF to Focus (AF Method)



Press the shutter button halfway and 
the camera will focus on the face 
covered by the <p> frame.



When focus is achieved, the AF point 
will turn green and the beeper will 
sound.



If focus is not achieved, the AF point 
will turn orange.



If a face cannot be detected, the AF 
point < > will be displayed and AF 
will be executed at the center.



Check the focus and exposure, then 
press the shutter button completely to 
take the picture (p.70).



If the subject’s face is significantly out of focus, face detection will not be 
possible. If the lens enables manual focusing even while the lens’s focus 
mode switch is set to <f>, turn the focusing ring to attain rough focus. 
The face will then be detected and <p> will be displayed.



An object other than a human face may be detected as a face.



Face detection will not work if the face is very small or large in the picture, 
too bright or too dark, tilted horizontally or diagonally, or partially hidden.



The <p> may cover only a part of the face.



When you press <0>, the AF method will switch to [FlexiZone - Single] 
(p.73). You can press the <S> cross keys to move the AF point. Press 
<0> again to return to [u(Face detection) Live Mode]. (If C.Fn-9 is 
set, hold down the <O/L> button and press <0>.)



Since AF is not possible with a face detected near the edge of the 
picture, the <p> will be grayed out. Then if you press the shutter button 
halfway, the center AF point < > will be used to focus.