Canon EOS Rebel T6 EF-S 18-55mm IS II Kit 手册

101

If the transmission rate drops, the connection is lost, or other problems 
occur when using the wireless functions, try the following corrective 
actions.



When using indoors, install the device in the room where you are 
using the camera.



Install the device higher than the camera.



Install the device where people or objects do not come between it 
and the camera.



Install the device as close to the camera as possible. In particular, 
note that during outdoor use in poor weather, rain may absorb 
radio waves and disrupt the connection.

If the transmission rate of a wireless LAN drops because of the 
influence of the following electronic devices, stop using them or 
establish a connection further away from them.



The camera communicates over wireless LANs via IEEE 802.11b/ 
g/n using radio waves in the 2.4 GHz band. For this reason, the 
wireless LAN transmission rate may drop if there are Bluetooth 
devices, microwave ovens, cordless telephones, microphones, or 
similar devices operating on the same frequency band nearby.



If a wireless device on the same frequency band as the camera is 
used nearby, the transmission rate of the wireless LAN will drop.



When connecting multiple cameras to one access point, make 
sure that the cameras’ IP addresses are different.



When multiple cameras are connected to one access point, the 
transmission rate drops.



When there are multiple IEEE 802.11b/g/n (2.4 GHz band) access 
points, leave a gap of four channels between each wireless LAN 
channel to reduce radio wave interference. For example, use 
channels 1, 6, and 11, channels 2 and 7, or channels 3 and 8.