Canon EOS Rebel T6 EF-S 18-55mm IS II Kit 手册
38
This section explains how to connect the camera and Connect Station
(sold separately) wirelessly. To save images in other ways, refer to the
Connect Station Instruction Manual.
(sold separately) wirelessly. To save images in other ways, refer to the
Connect Station Instruction Manual.
Set up the camera to allow use of its NFC function in advance
(p.16).
(p.16).
1
Enable the NFC function on the
camera
camera
.
2
Hold the camera close to Connect
Station.
Station.
Turn on the camera and Connect
Station, then hold the camera’s p
mark close to the Connect Station’s
NFC connect point.
Station, then hold the camera’s p
mark close to the Connect Station’s
NFC connect point.
When a message indicating the
connection is displayed on the
camera’s LCD monitor and Connect
Station responds, move the camera
away from Connect Station.
connection is displayed on the
camera’s LCD monitor and Connect
Station responds, move the camera
away from Connect Station.
When a connection is established,
Connect Station checks the images
on the memory card, then saves only
the unsaved images.
Connect Station checks the images
on the memory card, then saves only
the unsaved images.
The camera’s <k> lamp will light up
in green.
in green.
3
Terminate the connection.
After images are saved, the screen
on the left will appear on the camera’s
LCD monitor. Press <0> to
terminate the connection.
on the left will appear on the camera’s
LCD monitor. Press <0> to
terminate the connection.
Saving Images
NFC connect point