Canon EOS Rebel T6 EF-S 18-55mm IS II Kit 手册

42

To start with, check if the access point supports WPS* that allows easy 
connection between Wi-Fi devices.
If you do not know if the access point you use is WPS-compatible, refer 
to the access point instruction manual or other documentation.

* Wi-Fi Protected Setup



When WPS is supported
The following two connection methods are available. Connection 
can be established easier with WPS (PBC mode).
• Connecting via WPS (PBC mode): Perform the operations 

described on page 43.

• Connecting via WPS (PIN mode): Perform the operations 

described on page 45.



When WPS is not supported
• Connecting to a detected network manually: Perform the 

operations described on page 48.

This camera supports the following options for [Authentication] and 
[Encryption settings]. Therefore, when connecting via an access 
point, the encryption used by the access point must be one of the 
following.



[Authentication]: Open system, Shared key, or WPA/WPA2-PSK



[Encryption settings]: WEP, TKIP, or AES





When connecting to a network that has a network administrator, ask the 
administrator about the detailed setting procedures.

If the network you use filters by MAC address, register the MAC address of 
the camera at the access point. The MAC address can be checked on the 
[General sett.] screen (p.88).