Canon EOS C300 Mark II PL 手册
15
If you prefer, you can enter manually the details of the Wi-Fi network you want to connect to.
Follow the instructions on the screen to complete the procedure.
Follow the instructions on the screen to complete the procedure.
1
To enter the [SSID] (network name),
select [Input] and then press SET.
select [Input] and then press SET.
Enter the SSID (network name) using the
keyboard screen (A 10).
keyboard screen (A 10).
2
Select the Wi-Fi network’s
authentication method and then press
SET.
authentication method and then press
SET.
If you selected [Shared Key], skip to step 4.
3
Select the Wi-Fi network’s encryption
method and then press SET.
method and then press SET.
If the authentication method is [Open], you can
select [WEP] and continue to step 4, or [No
encryption] and skip to step 6.
select [WEP] and continue to step 4, or [No
encryption] and skip to step 6.
If the authentication method is [WPA-PSK] or
[WPA2-PSK], you can select [TKIP] or [AES] and
skip to step 5.
[WPA2-PSK], you can select [TKIP] or [AES] and
skip to step 5.
4
Select the WEP index key.
This step is only necessary if the Wi-Fi network’s
authentication method is set to [Shared Key] or if
the encryption method is set to [WEP].
authentication method is set to [Shared Key] or if
the encryption method is set to [WEP].
5
To change the [Encryption Key]
(password), select [Input] and then
press SET.
(password), select [Input] and then
press SET.
Enter the encryption key (password) using the
keyboard screen (A 10).
keyboard screen (A 10).
6
Manual Setup
[WEP]/[Shared Key]