Canon EOS C300 Mark II PL 手册
24
After establishing a connection between the camera and a Wi-Fi enabled device
1
, you can start
the Browser Remote application on the device’s Web browser
2
. Refer also to the instruction
manual of the Wi-Fi enabled device used.
1
For details about compatible devices, operating systems, Web browsers, etc. please visit your local Canon
Web site.
Web site.
2
A Web browser is required that supports JavaScript and is enabled to accept cookies.
1
Set the camera to
mode and open
the [Browser Remote] submenu.
[w System Setup] > [Network Settings] > [Browser
Remote]
Remote]
2
Select [Activate], select [On] and then
press SET.
press SET.
The current connection settings will be displayed
on the screen. You will need to select the
displayed SSID (network name) and enter the
displayed password in the device’s Wi-Fi settings
(step 4), and the URL in the Web browser’s
address bar (step 6) so write them down if
necessary.
on the screen. You will need to select the
displayed SSID (network name) and enter the
displayed password in the device’s Wi-Fi settings
(step 4), and the URL in the Web browser’s
address bar (step 6) so write them down if
necessary.
The actual password will be displayed only for the
default connection settings.
default connection settings.
3
Press SET to activate the Camera
Access Point connection and close the
menu.
Access Point connection and close the
menu.
will appear on the top of the screen. When the
icon turns white, the camera is ready to accept
commands from the Browser Remote application.
commands from the Browser Remote application.
4
Connect the device to the camera’s
access point.
access point.
Use the SSID and password from step 2 to change
the device’s Wi-Fi settings.
the device’s Wi-Fi settings.
Starting Browser Remote
Preparations on the Camera
Preparations on the Wi-Fi Enabled Device