Canon EOS Rebel T6i EF-S 18-55mm IS STM Lens Kit 手册
118
Four methods (metering modes) to measure the subject’s brightness
are provided. Normally, evaluative metering is recommended.
In Basic Zone modes, metering mode is set automatically.
are provided. Normally, evaluative metering is recommended.
In Basic Zone modes, metering mode is set automatically.
1
Select [Metering mode].
Under the [z2] tab, select [Metering
mode], then press <0>.
mode], then press <0>.
2
Set the metering mode.
Select the desired metering mode,
then press <0>.
then press <0>.
q
Evaluative metering
General-purpose metering mode suited even
for backlit subjects. The camera sets the
exposure automatically to suit the scene.
for backlit subjects. The camera sets the
exposure automatically to suit the scene.
w
Partial metering
Effective where there are much brighter lights
around the subject due to backlight, etc. The gray
area in the left figure is where the brightness is
metered to obtain the standard exposure.
around the subject due to backlight, etc. The gray
area in the left figure is where the brightness is
metered to obtain the standard exposure.
r
Spot metering
Effective when metering a specific part of the
subject or scene. The gray area in the left figure
is where the brightness is metered to obtain the
standard exposure. This metering mode is for
advanced users.
subject or scene. The gray area in the left figure
is where the brightness is metered to obtain the
standard exposure. This metering mode is for
advanced users.
e
Center-weighted average metering
The brightness is metered at the image center
and then averaged for the entire scene. This
metering mode is for advanced users.
and then averaged for the entire scene. This
metering mode is for advanced users.
q
Changing the Metering ModeK