Canon EOS Rebel T6i EF-S 18-55mm IS STM Lens Kit 手册
114
This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
Even if there are multiple access points active in the surrounding
area, a relatively reliable connection can be established using this
shared identification number.
area, a relatively reliable connection can be established using this
shared identification number.
It may take approx. one minute to establish a connection.
1
Select [Wi-Fi function].
Under the [51] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function].
to [Enable], then select [Wi-Fi
function].
2
Select [m].
Select [m] (Upload to Web service)
and press <0>.
and press <0>.
3
Select a Web service.
Select a Web service to connect to,
then press <0>.
then press <0>.
The contents and ordering of the list
of items displayed will vary depending
on settings.
of items displayed will vary depending
on settings.
The Web service to connect to can be
changed later (p.126).
changed later (p.126).
The camera’s <k> lamp will blink.
When the [Send to] screen (p.125) is
displayed, select a destination and go
to step 4.
displayed, select a destination and go
to step 4.
Connection via WPS (PIN Mode)