Canon EOS Rebel T6s EF-S 18-135mm IS STM Lens Kit 手册
7
Confirming Computer Settings
Before you start up EU, connect the camera and the computer
and set the camera’s power switch to <ON>, then make sure that
the following settings are applied to your computer. If these are
not applied, adjust the settings as follows.
Before you start up EU, connect the camera and the computer
and set the camera’s power switch to <ON>, then make sure that
the following settings are applied to your computer. If these are
not applied, adjust the settings as follows.
Select [Applications] [Image Capture]. Double-click the
icon of the camera connected to the computer. Set
[Connecting this camera opens] to [No application].
icon of the camera connected to the computer. Set
[Connecting this camera opens] to [No application].
After confirming and adjusting the settings, set the camera’s
power switch to <OFF>.
To start up EU, you must connect your camera to the same USB
port as when you confirmed and adjusted the settings.
To use another USB port, confirm and adjust the settings again.
power switch to <OFF>.
To start up EU, you must connect your camera to the same USB
port as when you confirmed and adjusted the settings.
To use another USB port, confirm and adjust the settings again.
With
, you can fix the plug
to the camera with the cable protector to prevent the plug from
disconnecting. For details on using, see
disconnecting. For details on using, see
to
1D X
1D C
5DS/5DS R
7D Mk II