Canon EOS Rebel T6s EF-S 18-135mm IS STM Lens Kit 手册
167
Four methods (metering modes) to measure the subject’s brightness
are provided. Normally, evaluative metering is recommended.
In Basic Zone modes, metering mode is set automatically.
are provided. Normally, evaluative metering is recommended.
In Basic Zone modes, metering mode is set automatically.
1
Select [Metering mode].
Under the [z2] tab, select [Metering
mode], then press <0>.
mode], then press <0>.
2
Set the metering mode.
Select the desired metering mode,
then press <0>.
then press <0>.
q
Evaluative metering
General-purpose metering mode suited even
for backlit subjects. The camera sets the
exposure automatically to suit the scene.
for backlit subjects. The camera sets the
exposure automatically to suit the scene.
w
Partial metering
Effective where there are much brighter lights
around the subject due to backlight, etc. The
gray area in the left figure is where the
brightness is metered to obtain the standard
exposure.
around the subject due to backlight, etc. The
gray area in the left figure is where the
brightness is metered to obtain the standard
exposure.
r
Spot metering
Effective when metering a specific part of the
subject or scene. The gray area in the left figure
is where the brightness is metered to obtain the
standard exposure. This metering mode is for
advanced users.
subject or scene. The gray area in the left figure
is where the brightness is metered to obtain the
standard exposure. This metering mode is for
advanced users.
q
Changing the Metering ModeK