Canon BU-47H 手册

E13

4-2. Control connectors

① DC-IN

This is an input terminal for DC power supply.

② LED

This is lit when the power is on, and it is not lit when the power is off.

③ START switch

This is the start switch.

④ AUX

This terminal is used to control arbitrary functions. (HR10A-10R-10S (71)/HIROSE)

For the pin assignment, refer to the separate installation manual. This can be used as a
universal contact circuit.

⑤ CONT.

This is an input terminal for the pan-tilt head, lens and camera control signals.
(PRC05-R12M/TAJIMI)
For the pin assignment, refer to the separate installation manual.

⑥ SDI

This is an output terminal for uncompressed digital video and digital audio signals.

⑦ VBS

This is an output terminal for SD composite signals.

⑧ SYNC

This is an input terminal for external sync signals.

⑨ Waterproof connector for MIC

This is the control terminal for the microphone (option).

⑩ Waterproof connector for washer

This is the control terminal for the washer (option).

4-3. Pan-tilt head, housing, lens, and camera operation

The BU-47H main unit and built-in lenses and camera are controlled from the operation unit.
The functions and operating procedures vary depending on the operation unit that is used. For further
information, please refer to the operation manual of your operation unit.

⑤

⑥

②

④

③

①

AUX

CONT

SD I

V BS

SYNC

⑦

⑧

Receptacle unit

A-A section

START

STOP

⑨

⑩