Canon EOS-1D X 手册

12

➜

The range of the clip between the IN point and the Out point is 
played back.

●

The In and Out points can be removed from [Marker] on the main 
window menu.
Select [Delete IN point], [Delete OUT point], or [Delete both IN 
point and OUT point] as required.

●

When no In or Out point has been set, the range played back is 
as follows.
• When no In point has been set, the playback range extends 

from the first frame of the clip to the Out point.

• When no Out point has been set, the playback range extends 

from the In point to the last frame of the clip.

• When no In point and no Out point have been set, the playback 

range is the entire clip.

●

Select [Play IN-OUT looped] from [Tools] on the main window 
menu to start looped playback between the In and Out points of 
the clip.

The In and Out point settings in the selected clip are saved 
automatically, and the settings continue to be effective the next time 
you work with the clip in EMU.

Movies shot with an EOS-1D C with Canon Log gamma 

 set to [On] 

will look dark and have low contrast by default. If you apply a look-up 
table (LUT) and play back the clip, you can check the clip with an image 
close to normal display.

●

[LUT] checkbox is not available if movies were shot with Canon 
Log gamma set to [Off].

●

Perform the operations described in “Movie Clip Playback” 

(p.6)

.

➜

The LUT is applied and the movie is played back.

You can check or uncheck the LUT checkbox with the <B> key on 
the board.

1D C