Olympus DS-3000 介绍手册
9
Inserting and Ejecting SmartMedia cards
Inserting and
Ejecting
SmartMedia cards
Ejecting
SmartMedia cards
Inserting SmartMedia cards
Insert the SmartMedia card into the slot as
shown below.
shown below.
1
Insert the SmartMedia in the
correct direction.
correct direction.
Push the SmartMedia card fully into
position.
position.
2
Set the POWER/LOCK switch to
ON.
ON.
SmartMedia inserted fully into the
slot
slot
When you set the POWER/LOCK switch to the
ON position, “PLEASE WAIT” flashes on the
display.
ON position, “PLEASE WAIT” flashes on the
display.
SmartMedia not inserted fully into the
slot
slot
When you set the POWER/LOCK switch to the
ON position, “INSERT CARD” flashes on the
display for 2 seconds. Pressing any button with
no SmartMedia card inserted causes “INSERT
CARD” to appear again.
Push the SmartMedia card fully into position.
ON position, “INSERT CARD” flashes on the
display for 2 seconds. Pressing any button with
no SmartMedia card inserted causes “INSERT
CARD” to appear again.
Push the SmartMedia card fully into position.
Notes
• If an unformatted SmartMedia card is inserted,
“FORMAT YES?” will display automatically. Format
the SmartMedia card (
the SmartMedia card (
→
P.26).
• Never use any SmartMedia card other than one that
has been formatted on this unit or on a CAMEDIA
series Olympus digital camera (
series Olympus digital camera (
→
P.4).
Bottom side
of SmartMedia
projecting from
the slot
of SmartMedia
projecting from
the slot
INDEX
PLAY
STOP
1
POW
ER
/LOCK
ON
OFF
2
contact area
SmartMedia
slot
slot