Olympus FE-140 用户手册

60

Get

ting t

o

 know your camera bet

te

r

5

• If you use a non-Olympus card or a card used for another application, such as 

for a computer, the message [CARD ERROR] is displayed. To use this card 
with this camera, use the [FORMAT] function to format the card.

g “MEMORY FORMAT (FORMAT)  Formatting the internal memory or card” (P.29)

This camera uses several lamps to indicate the camera status.

• Doing any of the following operations when not actually taking pictures can 

deplete the battery power.

• Repeatedly pressing the shutter button halfway
• Repeatedly using the zoom

• To save battery power, turn off the camera whenever it is not in use.

Lamp

Status

Self-timer lamp

The lamp lights for approximately 10 seconds, blinks for 
approximately 2 seconds, and then the picture is taken.

Card access lamp

Blinking: A picture is being recorded, the camera is reading 
a movie, or images are being downloaded (when 
connected to a computer).
• Do not do any of the following while the card access lamp 

is blinking. Doing so may prevent the image data from 
being saved and render the internal memory or card 
unusable.

• Open the camera’s battery compartment/card cover
• Remove the battery.
• Connect or disconnect the AC adapter.

Green lamp on the 
monitor

Lit: The focus and exposure are locked.
Blinking: The focus is not locked.
• Release your finger from the shutter button, re-position 

the AF target mark on the subject and press the shutter 
button halfway again.