Olympus PT-052 说明手册

EN 17

1 Close the Case gently while aligning the mounting projection of the rear lid 

and groove.

2 Turn the open/close dial clockwise until lock.

• The Case is sealed.

After sealing the Case, check that the camera operations normally.
1 Push the ON/OFF button on the Case and confirm that the camera 

turns ON/OFF.

2 Press the shutter lever on the Case and confirm that the camera 

shutter releases.

• Also operate other control buttons on the Case and confirm that the 

camera functions properly.

CAUTION:

• If the open/close dial is not fully turned, the Case will not be sealed. This 

will cause water leakage.

• Close the rear lid of the Case so that the lens cap or LCD hood strap 

doesn’t catch. If it catches, water leaks may result.

Close

PT-052_EN.book  Page 17  Thursday, December 22, 2011  6:23 PM