Netgear FVM318 – Cable and DSL ProSafe Wireless VPN Security Firewall 参考手册
Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
Virtual Private Networking
5-19
•
The FVM318 has a public IP WAN address of 134.177.100.11
•
The FVM318 has a LAN IP address of 192.168.0.1
•
The VPN client PC has a dynamically assigned address of 12.236.5.184
•
The VPN client PC is using a “virtual fixed” IP address of 192.168.100.100
While the connection is being established, the Connection Name field in this menu will say “SA”
before the name of the connection. When the connection is successful, the “SA” will change to the
yellow key symbol shown in the illustration above.
before the name of the connection. When the connection is successful, the “SA” will change to the
yellow key symbol shown in the illustration above.
Procedure 5-3: Deleting a Security Association
To delete a security association:
1.
Log in to the firewall.
1.
Click the VPN Settings link.
2.
In the VPN Settings Security Association table, select the radio button for the security
association to be deleted.
association to be deleted.
3.
Click the Delete button.
4.
Click the Update button.
Manual Keying
As an alternative to IKE, you may use Manual Keying, in which you must specify each phase of
the connection. Follow the steps to configure Manual Keying.
the connection. Follow the steps to configure Manual Keying.
Procedure 5-4: Using Manual Keying as an Alternative to IKE
1.
When editing the VPN Settings, you may select manual keying. At that time, the edit menu
changes to look like the screen below:
changes to look like the screen below:
Note: While your PC is connected to a remote LAN through a VPN, you might not have
normal Internet access. If this is the case, you will need to close the VPN connection in
order to have normal Internet access.
normal Internet access. If this is the case, you will need to close the VPN connection in
order to have normal Internet access.