Netgear FVS318N – Prosafe Wireless N VPN Firewall 参考手册

Click Apply to save your settings.

The DMZ Setup (IPv6) screen lets you set up the DMZ port for IPv6 traffic. You can enable or 
disable the hardware DMZ port (LAN port 8; see 

16) for IPv6 traffic and 

configure an IPv6 address and prefix length for the DMZ port.

The IPv6 clients in the DMZ can autoconfigure their own IPv6 address or obtain an IPv6 
address through a DHCPv6 server. 

DHCP Relay

To use the wireless VPN firewall as a DHCP relay agent for a DHCP server 
somewhere else in your network, select the DHCP Relay radio button. Enter the 
following setting:

Relay Gateway

The IP address of the DHCP server for which the wireless VPN 
firewall serves as a relay.

Enable LDAP 
information

To enable the DHCP server to provide Lightweight Directory Access Protocol 
(LDAP) server information, select the Enable LDAP information check box. Enter 
the following settings.

LDAP Server

The IP address or name of the LDAP server.

Search Base

The search objects that specify the location in the directory tree 
from which the LDAP search begins. You can specify multiple 
search objects, separated by commas. The search objects 
include:

•

CN (for common name)

•

OU (for organizational unit)

•

O (for organization)

•

C (for country)

•

DC (for domain)

For example, to search the Netgear.net domain for all last 
names of Johnson, you would enter:

cn=Johnson,dc=Netgear,dc=net

Port

The port number for the LDAP server. The default setting is 0 
(zero).

Enable DNS Proxy

This setting is optional. To enable the wireless VPN firewall to provide a LAN IP 
address for DNS address name resolution, select the Enable DNS Proxy check 
box. This check box is selected by default.

When the DNS Proxy option is disabled, all DHCP clients receive the DNS 

IP addresses of the ISP but without the DNS proxy IP address.