Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch 参考手册
ProSafe VPN Firewall FVS318v3 Reference Manual
Sample VPN Configurations with FVS318v3
C-7
v5.0, January 2012
–
Subnet Mask: 255.255.255.0 (in this example)
3. Log in to the FVS318v3 labeled Gateway B as in the illustration (
Log in at the default address of
http://192.168.0.1
with the default user name of admin and
default password of password (or using whatever password and LAN address you have
chosen).
chosen).
4. Repeat the process using the VPN Wizard to configure the FVS318v3 at Gateway B.
Follow the steps listed in
and
, but use the following parameters instead
•
Connection Name: Scenario_1 (in this example)
•
Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel
endpoints
endpoints
•
Remote WAN IP address: 14.15.16.17 (in this example), must be unique at each VPN
tunnel endpoint
tunnel endpoint
•
Remote LAN IP Subnet
–
IP Address: 10.5.6.1 (in this example), must be unique at each VPN tunnel endpoint
–
Subnet Mask: 255.255.255.0 (in this example)
All traffic from the range of LAN IP addresses specified on FVS318v3 A and FVS318v3 B will
now flow over a secure VPN tunnel once the VPN tunnel is initiated (see
now flow over a secure VPN tunnel once the VPN tunnel is initiated (see
).
Note: Based on the network addresses used in this example, you would log in to the
LAN IP address of
http://172.23.9.1
at Gateway B.