Netgear RD5D (ReadyDATA Disk Packs) – ReadyDATA Disk Packs (SATA/NL-SAS/SAS/SSD) 软件指南

Configure the IP settings as explained in the following table:

Configure IPv4

From the drop-down list, select how IPv4 is configured:

Using DHCP. The ReadyDATA functions as a DHCP client, and the IPv4 settings 
are automatically configured by a DHCP server on your network. 

Manually. You must enter the IPv4 address and subnet mask for the ReadyDATA, 
and the router through which the ReadyDATA is connected to the network.

IPv4 Address

Enter the IPv4 address for the ReadyDATA.

Manual 
configuration 
only

Subnet Mask

Enter the subnet mask for the ReadyDATA.

Router

Enter the IPv4 address for the router through which the ReadyDATA 
connects to your network. The default setting is 192.168.1.1.

Configure IPv6

From the drop-down list, select how IPv6 is configured:

Automatically. The ReadyDATA is configured with an IPv6 address through 

stateless autoconfiguration without the requirement of a DHCPv6 server on your 
network. The ReadyDATA does need to be connected to the Internet for stateless 
autoconfiguration to function.

Using DHCP. The ReadyDATA functions as a DHCPv6 client, and the IPv6 settings 
are automatically configured by a DHCPv6 server on your network. The default 
prefix length for DHCP is /64, to support some common DHCP servers.

Manually. You must enter the IPv6 address and prefix length for the ReadyDATA 
and the router through which the ReadyDATA is connected to the network.