Netgear AirCard 762S (Unlocked Retail) – 4G Mobile Hotspot – Unlocked (AC762S-100EUS) 用户指南

Rev 1  Sep.13

 

59

This chapter provides suggestions for troubleshooting problems that may 
arise when using your mobile hotspot.

1. Refresh the list of networks. 

2. Ensure that the Wi-Fi setting on your laptop (or other device) is 

turned on.

3. Ensure that Wi-Fi is enabled on the mobile hotspot. The Wi-Fi icon on 

the LCD should have a “0” beside it

 (not an “x” 

).

If you need to enable Wi-Fi on the mobile hotspot:

1. Use the USB cable to tether the mobile hotspot to your laptop. (The 

first time you do this, it will take a few moments for the drivers to 
install.)

2. Launch your browser and go to the homepage

3. Click the Wi-Fi users icon (

).

4. Under Enable Wi-Fi, select On.

5. Click Save.

If the No Signal icon ( ) appears on the LCD screen:

•

Make sure you are in your service provider’s coverage area.

•

Check the network technology setting (see 

 on page 19). Under Network Technology, ensure 

that Auto is selected in the drop-down menu. 

If the Wi-Fi radio is disabled icon (

) appears on the LCD screen, it 

could be because:

•

The mobile hotspot is in standby mode. Press the Navigation key or 
WPS button. If the “x” is still there, ensure that Wi-Fi is enabled.