Netgear XAV5004 – 4-port Powerline AV 500 Adapter 用户手册

Set the Encryption Key

You can use the Security button to change the default encryption key and set a private 
encryption key instead. The default encryption key is HomePlugAV.

Before you change the Encryption key, you need to install the 

Powerline adapters and get them up and running. Otherwise, they 
might not be able to communicate with each other.

Verify that all the Powerline adapters to be configured are plugged in. 

On the first Powerline XAV5004 Adapter, press its Security button for 2 seconds. 

The power LED will start blinking after you release the button.

The adapter will automatically produce a new, randomly generated network encryption 
key that each Powerline adapter will use. 

At this point, the other adapters in your network cannot communicate with each other.

Within 2 minutes of pressing the Security button on the first adapter, press the Security 
button on the second adapter for 2 seconds.

In order to pair the devices, both buttons must be pressed within 2 minutes.

This securely configures your Powerline network with the same network encryption key.

If your network has more than 2 adapters, press the Security button on the additional 
adapter for 2 seconds, then press the security button on any additional adapters in your 
existing network for 2 seconds. Both buttons must be pressed within 2 minutes. The 
adapters retain security settings even if they are unplugged. 

An adapter can only generate a private key once. To replace a 

private key, first reset the adapter back to its factory defaults, then 
follow the procedure above. See 

17.