Netgear C3700 – N600 WiFi Cable Modem Router 用户手册

Select Wireless.

In the Region list, select your region. In some locations, you cannot change this setting.

To turn off the wireless radios, scroll down and clear the Enable Wireless Gateway radio 

check box.

If you clear this check box, you cannot use WiFi to connect to the modem router.

To control the SSID broadcast, select or clear the Enable SSID Broadcast check box.

When this check box is selected, the modem router broadcasts its network name (SSID) 
so that it displays when you scan for local WiFi networks on your computer or wireless 
device.

To change the network name (SSID), type a new name in the Name (SSID) field.

The name can be up to 32 characters long and it is case-sensitive. The default SSID is 
randomly generated and is on the modem router’s label. If you change the name, make 
sure to write down the new name and keep it in a safe place.

To change the wireless channel, select a number in the Channel list.

In some regions, not all channels are available. Do not change the channel unless you 
experience interference (shown by lost connections or slow data transfers). If this 
happens, experiment with different channels to see which is the best. 

When you use multiple access points, it is better if adjacent access points use different 
channels to reduce interference. The recommended channel spacing between adjacent 
access points is four channels (for example, use Channels 1 and 5, or 6 and 10).

To change the mode, select it from the Mode list.

Up to 145 Mbps is the default setting, which allows 802.11n and 802.11g wireless 
devices to join the network. g & b supports up to 54 Mbps. The 300-Mbps setting allows 
802.11n devices to connect at this speed.

Click the Apply button.

Your settings are saved.