IMC Networks AccessConverter, TX/3 + FX-MM850-SC 852-10151 产品宣传页
产品代码
852-10151
800-624-1070
www.imcnetworks.com
RoHS Compliant
M
edia
C
onversion
Features and Benefits
Most cost-effective fiber converter
available today
• Low cost, high flexibility— same small
unit performs media conversion and
switching functions
• Made in America with a 6-year
comprehensive warranty
(including power adapter)
Plug-and-Play operation
• User-friendly 10/100 Auto Negotiation
technology
• AutoCross feature for twisted pair
connection
Perfect for a variety of applications
• Device includes high-reliability power
cube with country-specific clip
• Available for multi-mode or single-mode
fiber and single-strand fiber
• Uplink available on rear or front of unit
• Install inside network interface device
Space saving alternative
• Device has small, rugged enclosure with
compact external power supply
• Table-top or wall-mount installation
Multi-port, copper to fiber, switching
media converter features:
• Three 10/100 twisted pair downlink ports
• One 100 Mbps fiber or 10/100 twisted
pair uplink port
• A universal, external switching AC power
cube with a country-specific power clip
Multi-Port, 10/100 Mbps Switching Standalone Media Converter
AccessConverter
Terminate fiber and connect multiple Ethernet devices— PCs, webcams,
printers— at a remote location with a single device.
Terminating a fiber run while using various local, copper-based
devices such as PCs, printers, VoIP, etc. is essential for the success
of Fiber-to-the Business, Curb and other FTTx projects. Remote
locations have similar configuration demands. Connecting the
multiple copper devices to the fiber, however, typically requires
the use of both a media converter and a switch— two pieces of
equipment to purchase and two pieces of equipment to monitor
and maintain. IMC Networks streamlines FTTx projects as well as
the connection of remote locations with its AccessConverter, a
multi-port, switching media converter.
Best of all, one compact AccessConverter module reduces the
Best of all, one compact AccessConverter module reduces the
amount of required equipment while providing all the features of
a switch (store and forward switching mechanics, MAC address
learning, protection against broadcast storms, flow control, etc.)
and performing the electrical-to-optical conversion. In addition,
the unit’s small size and wall-mount bracket (included) allow you
to install AccessConverter virtually anywhere, including inside a
network interface device (NID).
Requiring no configuration, the AccessConverter offers
plug-and-play operation:
• Each copper port auto-senses the connected device’s speed
and duplex mode (10 Mbps or 100 Mbps and HDX or FDX)
and includes AutoCross, a feature which automatically selects
between a crossover workstation (MDIX) or pass-through
(MDI) connection depending on the connected device
• The fiber port always operates at 100 Mbps FDX, and supports
distances up to 80 km
Depending on configuration requirements, the AccessConverter
can be ordered with the uplink port on the back or the front of the
unit. The AccessConverter series also includes a single-strand fiber
version which can effectively double the capacity of fiber.
Application Example