KitchenAid 30" Retractable Downdraft System with Interior Blower Motor 使用和维护

6. Hold the wire-mounting plate and push the grommet out

of the wire-mounting plate.

7. Slide the wire assembly through the slot in the wire-mounting

plate to remove it.

8. Place the wire assembly through the opening to the opposite

side of the vent box.

9. Reassemble the wire assembly and grommet to the

wire-mounting plate.

10. Install the wire mounting plate to the vent box using the

4 screws previously removed.

11. Place the blower motor box assembly with the keyhole slots

over the 2 shoulder screws on the rear of the vent box and

reconnect the wire connection to the blower motor.

12. Mount the blower motor box to the vent box and secure

using the 6 screws previously removed.

13. Mount the 4

" (12.0 cm) cover box (supplied) to the front

of the vent box. Place the keyhole slots over the 2 shoulder

screws, align the mounting holes, and secure the cover box

to vent box using the 6 screws previously removed from the

¼" (6.4 mm) deep cover.

A. Wire-mounting plate
B. Grommet

14. Remove the front cover from the deep cover, place the front

cover over the previously mounted cover box, and secure

using the 4 screws previously removed.

15. Go to the “Complete Installation” section.

A.  Deep cover
B.  Front cover
C.  Cover box (supplied)