Xerox Xerox Wireless Print Solutions Adapter Support & Software 安装指南

At the top of the Quick Setup screen, if needed, 
click the menu, then select a language. In a few 
seconds, the screen refreshes and displays the 
selected language. You may need to log in again.

Note: if the Quick Setup page does not appear, 
click the Administration tab, then in the 
navigation pane, select Quick Setup.

 

For Bridge 1 (br0) Configuration, select Enabled. 
Leave the Bridging MAC Address field blank.

 

Optionally, if your wireless router supports WPS 
and it is enabled, you can use WPS. If WPS is 
preferred, click the protocol that your router 
supports. Options are WPS (PBC) or WPS (PIN). For 
details, refer to the documentation for your router. 
Proceed to Step 8.

 

From the list of Available Networks, click the 
required network’s SSID. 

 

For Connect To, enter the credentials for the SSID 
that you selected.

 

Leave the fields for Printer and Add Printer blank. 
Click Submit, then to confirm, click OK.

installation_and_connection_setup_guide.pdf   3

8/11/15   7:53 AM