Xerox Paris, a document system Support & Software 用户指南
Job Definitions
The PARI
S Spooler32 Technical Manual
65
Byte Settings
Byte Settings must be set to match those of the host computer. Ask your
maintenance engineering staff what settings are required.
maintenance engineering staff what settings are required.
Handshaking
The options available in the Hardware Handshaking drop-down menu are
None; DTR Only, RTS Only and DTR and RTS.
None; DTR Only, RTS Only and DTR and RTS.
Software Handshaking
The Software Handshaking checkbox is selected by default.
WARNING!
This option should NOT be de-selected unless the host sends so slowly that
overruns cannot occur.
overruns cannot occur.
Page Eject
The page eject options control whether or not a page is ejected from the printer
after a specified number of seconds.
after a specified number of seconds.
While this option is useful when the last page is not automatically ejected from
the laser printer, it can cause problems if the serial link is broken in the middle
of a print job, in this case the half completed page will be ejected before the
remaining data is received.
the laser printer, it can cause problems if the serial link is broken in the middle
of a print job, in this case the half completed page will be ejected before the
remaining data is received.