Xerox Document Workstation with PlotWorks Support & Software 用户指南
8-44 • PlotWorks User Guide
Simulate Printing
You can set up the Printer Interface to simulate printing even when the printer is
turned off or disconnected. The simulation mode is useful for training,
demonstrations or problem-solving.
turned off or disconnected. The simulation mode is useful for training,
demonstrations or problem-solving.
In simulation mode, you can specify the types of media “detected” in the printer
and you can display any printer errors that can be viewed on-screen. When you
send a job to the Queue, the Printer Interface simulates its passage through the
printer.
and you can display any printer errors that can be viewed on-screen. When you
send a job to the Queue, the Printer Interface simulates its passage through the
printer.
Rolls cannot be simulated in RTL or embedded printers by setting a roll here.
Medium must be in the Inventory and use Media Change to set it as the active roll.
Medium must be in the Inventory and use Media Change to set it as the active roll.
To simulate printing:
1.
Click on the Setup menu
2.
Select Simulation/Demo. The Simulation Options dialog box appears.
8.30
Paper Jam
error
3.
Select Simulate printer.