Xerox WorkCentre 5022/5024 用户指南
Tools
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-37
Off is set at the time of factory shipment.
Notes
•
When On is selected, faxes cannot be forwarded if there are more than 20 faxes scheduled for
transmission. Incoming faxes are printed out.
transmission. Incoming faxes are printed out.
•
If the recipient of the forwarded fax is also set to forward received faxes and has specified the
machine as the recipient, an infinite loop of forwarding operations could result. Ensure an infinite
loop will not result when setting the fax forwarding number.
machine as the recipient, an infinite loop of forwarding operations could result. Ensure an infinite
loop will not result when setting the fax forwarding number.
•
If the fax could not be forwarded due to the recipient's line being busy or a similar issue, the fax
number is redialed. Incoming faxes are printed out if the number of redials exceeds the number of
redials set on the machine.
number is redialed. Incoming faxes are printed out if the number of redials exceeds the number of
redials set on the machine.
Auto Reduce On Receipt
Used to set incoming oversized faxes to reduce in size and print them to fit in a single page.
You can select On or Off.
On is set at the time of factory shipment.
Border Limit
Used to set incoming oversized faxes to only print the portion that fits on in a single page.
You can set values between 0 and 127 mm (in 1 mm increments).
16 mm is set at the time of factory shipment.
Receive Size
Used to restrict the paper size incoming faxes are printed. When an incoming fax is received, the
machine notifies the sender fax machine of the required fax size.
machine notifies the sender fax machine of the required fax size.
A4/B4/A3 is set at the time of factory shipment.
Notes
•
Document width is used to indicate the fax size restriction.
•
If you received a fax in B4 paper size when the machine has no tray containing B5 paper, it is
printed in A3 paper. If the machine has the tray for B4 paper size ready and the tray is empty, the
message for loading paper is displayed on the screen.
printed in A3 paper. If the machine has the tray for B4 paper size ready and the tray is empty, the
message for loading paper is displayed on the screen.
Off
Prints received faxes.
On
Forwards received faxes to the specified fax number. Select On and press the OK button to display the
Speed Dial entry screen. Use the numeric keypad to enter the fax forwarding number.
Speed Dial entry screen. Use the numeric keypad to enter the fax forwarding number.
Auto
The machine prints incoming faxes by selecting the tray containing the paper of the correct size.
A4
The machine restricts incoming faxes to A4 size (210 mm width).