Xerox Phaser 7500 用户指南

Network Basics

Phaser 7500 Color Printer
User Guide

50

To enable/disable automatic address assignment, use one of the following options:

•

The printer’s control panel

•

CentreWare IS

To change DHCPv6 options using the control panel:

1. Select 

Printer Setup > Connection Setup > Network Setup > TCP/IPv6 Setup > DHCPv6 Mode, 

then press the 

OK button.

2. Select the 

DHCPv6 option, then press the OK button.

To change DHCPv6 options using CentreWare IS:

1. Launch your Web browser.

2. Enter your printer’s IP address in the browser’s 

Address field.

3. Click 

Properties.

4. Select the 

Protocols folder on the left navigation panel, then click TCP/IP.

5. Click the 

TCP/IP (v6) button.

6. Select/deselect the DHCPv6 options.

7. Click the 

Save Changes button at the bottom of the page.

Manual Address Assignment

A manually entered IPv6 address is used in addition to any other IPv6 addresses. To create a manual 
address, enter the IPv6 address and prefix length in the fields provided in CentreWare IS. The default 
prefix length is 64.

To manually set the IPv6 address, use one of the following options:

•

The printer’s control panel

•

CentreWare IS

To set the IPv6 address on the control panel:

1. Select 

Printer Setup > Connection Setup > Network Setup > TCP/IPv6 Setup, then press the OK 

button.

2. Select 

Manual Address, then press the OK button to turn manual addressing on.

3. Select 

Manual Address, then press the OK button.

4. To set the address:

a. Use the 

Up Arrow and Down Arrow buttons to set the first number, then press the OK button. 

b. Continue setting individual numbers, pressing the 

OK button after setting each one. When you 

get to the end of the address, press the 

OK button to return to the menu.