Xerox WorkCentre 3335/3345 用户指南
6
Copying
Basic Copying
1. To clear previous settings, at the control panel, press the yellow Clear All button. The
Clear All Confirmation screen appears.
2. Touch Confirm or Close.
3. Load your original documents.
3. Load your original documents.
• Use the document glass for single pages or paper that cannot be fed using the
document feeder. Place the first page of the document face down, in the top left
corner of the document glass.
corner of the document glass.
• Use the document feeder for multiple or single pages. Remove any staples and
paper clips from the pages and place them face up in the document feeder.
4. Press the Services Home button, then touch Copy.
5. To enter the number of copies, use the alphanumeric keypad on the touch screen or
5. To enter the number of copies, use the alphanumeric keypad on the touch screen or
the control panel. Touch the Right arrow.
6. Change the copy settings as needed. Refer to
7. Press the green Start button.
• To pause or cancel a copy job, at the control panel, press the red Stop button.
• To interrupt a copy job, at the control panel, press the Interrupt Printing button.
• To interrupt a copy job, at the control panel, press the Interrupt Printing button.
Document Glass
Document Glass Guidelines
The document glass accommodates original sizes up to 210 x 297 mm (A4/8.5 x 11 in.).
Use the document glass rather than the document feeder to copy or scan the following
types of originals documents:
Use the document glass rather than the document feeder to copy or scan the following
types of originals documents:
• Paper with paper clips or staples attached
• Paper with wrinkles, curls, folds, tears, or notches
• Coated or carbonless paper or items other than paper such as cloth or metal
• Paper with wrinkles, curls, folds, tears, or notches
• Coated or carbonless paper or items other than paper such as cloth or metal
6-1
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide