Xerox Xerox Secure Access Unified ID System Support & Software 管理员指南
Secure Access Overview
Xerox Secure Access Administration Guide
16
Secure Access Components
The solution requires two main components:
1. Secure Access Authentication Device, which is comprised of an Authentication Terminal and an
1. Secure Access Authentication Device, which is comprised of an Authentication Terminal and an
external card reader. Users do not access the Authentication Terminal.
The Card Reader is connected to the Authentication device via serial cable only, and is not
attached directly to the MFP. Refer to the Installation Guide for placement and mounting
instructions.
The Card Reader is connected to the Authentication device via serial cable only, and is not
attached directly to the MFP. Refer to the Installation Guide for placement and mounting
instructions.
Figure 3-2: Secure Access Authentication Device components
or
1. Secure Access Server USB Card Reader, which is connected to the MFP. Refer to the Installation
1. Secure Access Server USB Card Reader, which is connected to the MFP. Refer to the Installation
Guide for placement and mounting instructions
2. Secure Access Server, which is comprised of the following components:
• Core Authentication Server (CAS)
• Device Control Engine (DCE)
• Document Routing Engine (DRE)
• Secure Access Manager (Administrative Tools)
• Device Control Engine (DCE)
• Document Routing Engine (DRE)
• Secure Access Manager (Administrative Tools)
Note:
You can install these components on a single server, or distributed across multiple servers. In
some deployments, you may also require more than one DCE or DRE. See the Installation Guide for
complete details.
complete details.
Figure 3-3: Secure Access Server Components
Card Reader
Secure Access Authentication
Device
Ethernet Connection
DCE
DRE
CAS
Mgmnt
Tools
Secure Access Server