Xerox Xerox Secure Access Unified ID System Support & Software 管理员指南

Configuration & Management

Xerox Secure Access Administration Guide

25

Configuration Workflow

Follow the steps in the order they are presented below. Failure to do so will result in an incomplete 
installation. 

Before you start, ensure that you have correctly installed the Secure Access Server. Follow the 
instructions provided in the Xerox Secure Access Unified ID System

®

 Installation Guide. Install the CAS 

and at least one DCE and DRE. 
1. Configure Xerox MFP device to accept network authentication through the Xerox Secure 

Access mechanism
This is performed through the CentreWare Internet Services, which you connect to via an internet 
browser. Refer to the MFP System Administration CD for information on how to install and 
configure Xerox Secure Access on the device.

Create an entry for each MFP device in the Secure Access Manager. Allocate each MFP to a 
particular DRE print server (if required). 

Note:

This step is optional and should only be configured if Follow-You Printing is required at the 

site. 

To configure Follow-You Printing, create Pull Groups that group devices with like characteristics. 
When the user sends a document to an MFP within a Pull Group, they can authenticate at any MFP 
within the Pull Group and “pull” the job from the queue to be printed on that MFP. 

Configure the parameters that Secure Access will require to authenticate user access requests, 
including enabling secondary prompts and card data setup. 

Set the Active Directory Synchronization parameters, then import existing User accounts into the 
Secure Access database. 

To allow users to view release one or more documents from the secure print queue directly from the 
MFP front panel, install the Release My Documents custom service. 

To enable users to self-register their swipe cards.