Xerox Phaser EX7750 用户指南

Setup configures the EX7750 to communicate with other devices and manage print 
jobs. You must perform Setup the first time you turn on the EX7750 after new system 
software is loaded, or any time Server software is reinstalled. You must also perform 
Setup after using the Restore/Update CD. Initial Setup must be performed at the 
EX7750 Control Panel or from the FACI, but further changes to Setup can be 
performed remotely from WebSetup on WebTools.

Perform the following Setup options in the order listed:

•

—specifies system options.

•

—specifies all the active network systems that transmit print jobs to 

the EX7750.

•

—specifies how print jobs and queues are managed.

This is the minimum setup required to enable your EX7750 to begin printing. 

To configure network settings in Setup, you need a live network connection so the 
EX7750 can query the network for zones, servers, and server-based queues.

To perform Setup from the Control Panel, select one menu after another and enter 
information about your EX7750 and your network and printing environment. In each 
Setup screen, the last line of the display shows the name of the current Setup menu. 
Most of the menus you see are displayed on the Control Panel Map as a flow chart that 
you can print from the Control Panel.

For an introduction to EX7750 Setup and detailed instructions on setting up the 
EX7750 from the Control Panel and from a Windows computer using Command 
WorkStation or WebSetup, see the 

.