Xerox Phaser EX7750 安装指南
4
4-9
EX7750 Control Panel
Accessing Setup options
T
O
ACCESS
S
ETUP
WHEN
THE
EX7750
IS
I
DLE
Run Diagnostics
This function is provided for service representatives only. For information about
running diagnostics, contact your authorized service/support technician.
Calibration
Calibrate the EX7750 using VisualCal. If an Administrator password has been set,
you must enter it to access Calibration.
you must enter it to access Calibration.
1.
Make sure the information screen on the Control Panel reads Idle.
If Printing or RIPping appears, the EX7750 is processing, and you must wait until the system finishes and reaches the Idle state.
2.
Press the Menu button on the Control Panel to access the Functions menu.
3.
Scroll down with the down arrow button and press the line selection button next to
Run Setup.
Run Setup.
You are prompted to enter the Administrator password before you can perform
Setup (see
Setup (see
4.
When prompted, confirm your choice to proceed to Setup.
5.
Press the line selection button to choose a Setup menu or command.
Use the down arrow button to view the remaining screens of the main Setup
menu.
menu.
6.
Perform Server Setup, Network Setup, and Printer Setup, in that order.
This is the minimum required for initial Setup. Later, you can complete the
remaining Setups, either from the Control Panel or a Windows computer.
remaining Setups, either from the Control Panel or a Windows computer.
7.
Set an Administrator password to protect your Setup from unauthorized changes.
Review the settings described in this chapter.