Xerox Phaser 7300 产品宣传页
Trays
Phaser® 7300 Color Printer
8
4.
When the front panel prompts you and you haven’t changed the type or size of paper, press the
OK key to accept the current settings for type and size.
OK key to accept the current settings for type and size.
5.
If you have changed the type or size of paper:
a.
On the printer’s front panel, scroll to
Change
(by pressing the Down Arrow key) and press
the OK key.
b.
Scroll to the correct paper type and press the OK key to save your selection.
c.
Scroll to the correct paper size and press the OK key to save your selection.
Using custom size paper
In addition to the wide variety of paper sizes available for this printer, you can use custom size paper.
Depending on the size, custom size paper can be loaded in Tray 1 or the Multi-Purpose Tray (as
described on page 11).
Depending on the size, custom size paper can be loaded in Tray 1 or the Multi-Purpose Tray (as
described on page 11).
Note
After you load a custom size paper in any of this printer’s trays, you MUST set the front
panel values to agree with the paper you have loaded.
panel values to agree with the paper you have loaded.
Note
Banner paper (paper over 18 inches (450 mm) long must be loaded into the Multi-Purpose
Tray. You MUST use the Left Side Output Tray for output. See “Output Trays” on page 26.
Tray. You MUST use the Left Side Output Tray for output. See “Output Trays” on page 26.
Tray 1
Multi-Purpose Tray
X dimension
148 mm - 328 mm
5.83 in. - 12.60 in.
105 mm - 328 mm
4.13 in. - 12.60 in.
4.13 in. - 12.60 in.
Y dimension
148 mm - 457 mm
5.83 in. - 18 in.
148 mm - 914 mm
5.83 in. - 36 in.
OK
6200-45