Xerox Phaser 7760 管理员指南
Jam Recovery
System Administrator Guide
5-3
Jam Recovery
The jam recovery settings enable you to select how the printer handles jobs that are in the
process of printing when a media jam occurs. Jam recovery settings are especially important to
consider when printing checks. Normally when a media jam occurs, you can pull out the
jammed media and the printer reprints that page and then the rest of the job. While printing
checks, someone could cause a media jam as the media is exiting the printer so that a check is
reprinted. To prevent the printer from printing two copies of the same check, you can set the
printer to begin printing the job from the point where the media jammed through the end of the
job, or cancel the job completely.
process of printing when a media jam occurs. Jam recovery settings are especially important to
consider when printing checks. Normally when a media jam occurs, you can pull out the
jammed media and the printer reprints that page and then the rest of the job. While printing
checks, someone could cause a media jam as the media is exiting the printer so that a check is
reprinted. To prevent the printer from printing two copies of the same check, you can set the
printer to begin printing the job from the point where the media jammed through the end of the
job, or cancel the job completely.
To configure the jam recovery setting, use one of the following methods:
■
The printer’s control panel
■
CentreWare IS
Using the Control Panel
To configure the jam recovery setting:
1.
On the control panel, select
Printer Setup
, and then press the OK button.
2.
Select
Paper Handling Setup
, and then press the OK button.
Note:
If
Paper Handling Setup
is locked on the control panel, use CentreWare IS to
select the jam recovery setting.
3.
Select
Cancel After Jams
, and then press the OK button.
4.
Select
On
or
Off
, and then press the OK button.
Using CentreWare IS
To configure the jam recovery setting:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select the Security folder on the left sidebar.
5.
Select Printing Security Settings.
6.
If prompted, enter your Admin or Key User name and password.
7.
Under Jam Recovery Options, select one of the following options:
■
Reprint the jammed page and continue printing the rest of the job: After the jam
is cleared, the printer begins printing the job from the point where the media jammed,
including the jammed page, through the end of the job.
is cleared, the printer begins printing the job from the point where the media jammed,
including the jammed page, through the end of the job.
■
Immediately cancel the entire print job: After the jam is cleared, the printer cancels
the rest of the print job.
the rest of the print job.
8.
Click the Save Changes button.