Xerox Phaser 8400 用户指南

Perform the following procedure to set up your Macintosh for TCP/IP:

Select Network from the System Preferences application, then select TCP/IP.

Select Built-In Ethernet from the Active Ports menu.

Specify how you will obtain the IP address from the TCP/IP tab:

■

Manually: Specify the IP address, Subnet Mask, Router Address, and Name Server 
Address in the dialog box.

■

DHCP: If you wish to use AppleTalk, select the AppleTalk tab and verify that the 
Make AppleTalk Active box is selected.

Close the dialog box.

Open the Print Center Utility (located in Utilities in the Applications Directory).

Click Add.

Select IP Printing from the drop-down list.

Enter your printer’s IP address.

Deselect Use default queue on server box.

Type AUTO in the Queue Name field.

Select the appropriate PPD from the list displayed in the Printer Model drop-down list.

Click Add.

The following procedure eliminates cabling, communication, and connection problems. Once 
you complete these steps, print a test page from your software application. If the job prints, no 
further system troubleshooting is necessary. If there are print quality problems, go to 

Reference/Troubleshooting

 on the User Documentation CD-ROM.