Xerox Phaser 5335 安装指南
5
Engli
s
h
4.
Identify the location of the feed roll in the
printer.
printer.
5.
Remove the tab on the right side of the feed
roll to unlock the feed roll, and slide only the
white part to the right until it stops.
roll to unlock the feed roll, and slide only the
white part to the right until it stops.
6.
Slide the feed roll to the right toward the
white part, rotate it 90 degrees to the front,
and pull it out of the printer.
white part, rotate it 90 degrees to the front,
and pull it out of the printer.
7.
Place the new feed roll to the printer.
Hold the feed roll with the flat side to the left
and push it horizontally onto the shaft.
Hold the feed roll with the flat side to the left
and push it horizontally onto the shaft.
Note
• The surface of the feed roll is flat on one side and
• The surface of the feed roll is flat on one side and
jagged on the other side. Make sure to correctly orient
the feed roll when placing it on the printer.
the feed roll when placing it on the printer.
8.
Rotate the feed roll 90 degrees to the back
and slide it to the left so that the pins on the
shaft fit into the indentations on the feed
roll.
and slide it to the left so that the pins on the
shaft fit into the indentations on the feed
roll.