Xerox Phaser 840 文件
30
Phaser 840 Color Printer
2
Advanced Print Features
Previewing with Check Print
Requirements
■
Plus Feature Set
■
Enable the feature in the printer’s front panel
When printing multiple pages through the driver (either multiple copies of a single
page or a multiple-page file), select Check Print to preview the first page of the job
before proceeding with the remainder of the job; this feature is useful when printing
a large job.
page or a multiple-page file), select Check Print to preview the first page of the job
before proceeding with the remainder of the job; this feature is useful when printing
a large job.
Access to Check Print from the driver is enabled and disabled in the printer’s front
panel. You can also set the timeout in the front panel (timeout is the amount of time
the printer waits after sending the first page of a file before it continues with the
remainder of the job).
panel. You can also set the timeout in the front panel (timeout is the amount of time
the printer waits after sending the first page of a file before it continues with the
remainder of the job).
The factory default for Check Print is “disabled”; the default timeout is 5 minutes.
Follow these instructions to enable Check Print in the front panel, reset the default
timeout, and select the option in the printer driver.
Follow these instructions to enable Check Print in the front panel, reset the default
timeout, and select the option in the printer driver.
Enable Check Print
1.
In the front panel, scroll to
Menu
.; press
Select
.
2.
Scroll to
Printer Configuration
; press
Select
.
3.
Scroll to
Default Printer Settings
; press
Select
.
4.
Scroll to
Check Print
. Press
Select
to toggle the setting for Check
Print.
Reset the timeout
1.
In the front panel, scroll to
Menu
; press
Select
.
2.
Scroll to
Printer Configuration
; press
Select
.
3.
Scroll to
Default Printer Settings
; press
Select
.
4.
Scroll to
Check Print Timeout
; press
Select
.
5.
Use the up or down arrows to change the timeout (the amount of time
the printer pauses before completing the print job).
the printer pauses before completing the print job).
6.
Scroll to
Exit
and press
Select
to activate your selection.
N
O
T
E
You can also enable Check Print and control the default timeout through PhaserLink
Printer Management software. For details on PhaserLink Printer Management
software, refer to the
Printer Management software. For details on PhaserLink Printer Management
software, refer to the
PhaserShare Networking Manual on the printer’s CD-ROM or
Tektronix web site.