Xerox Phaser 840 文件
56
Phaser 840 Color Printer
4
Troubleshooting
Clearing a media jam
C
A
U
T
I
O
N
Some surfaces inside the printer may be hot. To avoid possible injury when clearing
a jam, do not touch any hot surfaces.
a jam, do not touch any hot surfaces.
■
When media jams in the printer, the front panel directs you to the location
of the jam. Follow the instructions on the front panel.
of the jam. Follow the instructions on the front panel.
■
Use both hands to gently pull the media through its normal path out the
top of the printer (exit cover), if possible. Use the thumbwheel to advance
the media. Do not use excessive force pulling the media; it may tear.
top of the printer (exit cover), if possible. Use the thumbwheel to advance
the media. Do not use excessive force pulling the media; it may tear.
■
After removing the jammed media, inspect it for tears. Do not leave any
scraps of media in the printer.
scraps of media in the printer.
■
If your prints have ink smears after clearing a jam, clean the printer’s feed
rollers. Refer to page 64.
rollers. Refer to page 64.
■
If jamming persists, cleaning the printer’s internal paper path may solve
the problem. Refer to page 63.
the problem. Refer to page 63.
W
A
R
N
I
N
G
Never use a sharp object to remove jammed paper; you may damage the print
drum, requiring repair to your printer.
drum, requiring repair to your printer.