Xerox Phaser 840 文件

下载
页码 152
60
Phaser 840 Color Printer
4
Troubleshooting 
The Cleaning Page
The Cleaning Page, a page with a series of narrow, colored stripes, is output  each 
time the printhead is cleaned.  This occurs at the following times:
When you run the cleaning procedure to eliminate light stripes in your 
prints.  Refer to “Light stripes on prints” on page 58 for more information.
During the printer’s warming-up routine.
After emerging from Energy Star standby mode.
   
     
Selecting the Cleaning Page source
The default source for the Cleaning Page or other paper that the printer uses in its 
cleaning procedures is the lower tray.  When one or two High-Capacity Paper Tray 
Assemblies are installed, you can ensure that the printer always uses paper from the 
lower  or middle paper tray in its self-cleaning procedures by changing a setting in 
the printer’s front panel as follows:
1.
When the 
Ready to Print
 message is displayed, scroll to 
Menu 
and press 
Select
.  
2.
Scroll to 
Printer Configuration
; press 
Select
.
3.
Scroll to 
Default Printer Settings
; press 
Select
4.
Scroll to 
Advanced Printer Settings
; press 
Select
.
5.
Scroll to 
Cleaning Page Source
; press 
Select
 and choose the desired tray.
6.
Scroll to 
Exit
; press 
Select
 to return the printer to the 
Ready to Print 
message.
You can also change the default through PhaserLink Printer Management software if 
you are connected to a network via TCP/IP.   Simply enter your printer’s IP address 
in a standard web browser.  Refer to the PhaserShare Networking Manual for details. 
1
  Red
 Green
 Blue
 Black
9103-03
1 2 3 4
Phaser
®
 840 Cleaning Page
This page prints to maintain optimal print quality.