Xerox Phaser 840 文件

For the latest information on color libraries, visit the Tektronix web site at 
www.tektronix.com/Color_Printers/

 or contact your local Tektronix reseller.   

PANTONE Color files for your printer include printer-specific color library files for 
some specific applications and a file to print PANTONE Color sampler chart.

In some applications, you can select colors from PANTONE Color selection books.  
These colors can be proofed on your Phaser printer before final output on a printing 
press. For this method, the printer-specific PANTONE files are not required.

From an application, select and apply PANTONE Colors; use individual 
color values from a PANTONE Colors selection book.

Print your document; from a supported driver, select the Commercial Press 
color correction.  (Proof colors may not be completely accurate, but 
PANTONE Colors will be printed correctly on a printing press.)  

When you are satisfied with the proof, the file can be separated for printing 
press plates without adjustment to the file.

Your printer can produce process color simulations of PANTONE Spot Colors.  

Print a copy of the PANTONE Color chart. Refer to “Printing the 
PANTONE Color Chart” on page 89, or the “README.TXT” file included 
with the printer-specific PANTONE files.

Within an application, define the desired color in your document by using 
the individual CMYK values which appear on the sampler chart.  

Print your document. For best results, use the same printer settings for 
color correction and print quality, and the same type of paper that you used 
to print the PANTONE Color chart.

For colors to be printed as a process color (no spot colors), follow these steps:

Open the application.

Before separating the file for printing press plates, replace the printer’s 
PANTONE process Colors with standard PANTONE Colors.  

Tektronix provides custom PANTONE Color library files  that can be installed 
for some applications for the Phaser

 

840 printer.