Xerox Phaser 840 产品宣传页
4
Adding Plus Features to a standard Phaser 840 — Upgrade Kit Z840FP
6.
A metal plate holds the place of the SCSI riser board on the rear panel.
Remove the metal plate.
Remove the metal plate.
7.
Carefully install the SCSI riser board on the main board.
a.
Carefully align the two rows of pins on the main board with the
two connectors on the bottom side of the SCSI riser board; orient
the riser board’s SCSI connector through the cutout in the rear
panel.
two connectors on the bottom side of the SCSI riser board; orient
the riser board’s SCSI connector through the cutout in the rear
panel.
b.
Press down firmly on the SCSI riser board to seat it squarely and
completely on the two rows of pins.
completely on the two rows of pins.
8.
Secure the SCSI connector with two screws provided in the upgrade
kit.
kit.
9.
Carefully align the main board with the board guides at the rear of the
printer and insert the main board into the printer. Ensure the main
board is fully seated. Secure the board with the two screws removed
earlier.
printer and insert the main board into the printer. Ensure the main
board is fully seated. Secure the board with the two screws removed
earlier.
10.
Print a configuration page to check its listing of the printer's memory
and options.
and options.
11.
Update your host computer’s printer driver so the driver matches the
Plus-upgraded printer; this involves configuring the printer driver
residing on your computer. This is discussed in the
Plus-upgraded printer; this involves configuring the printer driver
residing on your computer. This is discussed in the
Phaser 840 Setup
Guide
as well as in the printer CD-based document
Advanced Features
and Troubleshooting Manual
.
840-4-39
SCSI riser board