Xerox Phaser 6010 用户指南

Troubleshooting

Phaser 6000/6010 Color Printer
User Guide

38

Phaser 6000 Printer Error Codes

When the printer detects an error, it indicates the error by lighting or blinking the Error indicator light. 
When the Error indicator light is activated, one or more of the other symbols activate to indicate the 
fault. A blinking Error symbol indicates an error that renders the printer inoperable. Recovery requires 
restarting the printer or having the printer serviced. When the Error indicator light is lit solidly, or one or 
more of the indicators is on or flashing, the printer requires attention. Use the indicators and the 
following table to decode the error and determine the action to take.

If the symbol in the table is bold, it means that the indicator is lit solidly.

If the symbol in the table is smaller with radiating beams, it means that the indicator is flashing.

Power Saver

• Indicates the printer is in the Low Power or Sleep mode.
• Flashing indicates that the printer is canceling the current print job.
• Flashing when the Ready light is flashing indicates the printer is 

canceling the print job.

Jam

Flashing indicates a paper jam in the printer.

Error

• Indicates an error that needs your attention.
• Indicates the printer has a critical error that can only be corrected by 

restarting the printer or by calling for service.

Toner color is low (C, M, Y, or K). Order more toner of the indicated color. The 
printer is still able to print.

Toner warning. Replace the toner cartridge as necessary. Toner color is empty 
or the cartridge has an error.

No toner or toner CRUM error. Reseat the toner cartridge. Make sure that the 
toner meets printer specifications.

Close the rear cover. If the rear cover is already closed, see