Xerox Phaser 6000 用户指南

Maintenance

Phaser 6000/6010 Color Printer

User Guide

19

Replacing a Toner Cartridge

The printer has four toner cartridges: cyan (C), magenta (M), yellow (Y), and black (B). 

When a toner cartridge is nearly empty, a message appears on the control panel display screen:

Note: 

If the printer displays a toner cartridge error message with the original toner cartridges still 

installed, the printer needs to be reset. First, ensure that all of the toner cartridges are seated 
properly. Turn the printer off, then on again. If the error message persists after cycling the printer 
power, install a new toner cartridge.

Make sure that you have an adequate toner supply to prevent printing interruptions. For details, see 

When a toner cartridge needs replacing, the indicators on the control panel show which toner cartridge 
needs attention. The error indicator lights illuminate to show a fault. A toner indicator light (C, M, Y, or 
K) flashes to indicate which toner to replace.

Note: 

If the control panel lights indicate a toner cartridge error with the original toner cartridges 

still installed, the printer needs to be reset. First, ensure that all of the toner cartridges are seated 
properly. Turn the printer off, then on again. If the error indicator persists after cycling the printer 
power, install a new toner cartridge.

Make sure that you have an adequate toner supply to prevent printing interruptions. For details, see 

.

1. Spread some paper at the right side of the printer to catch loose toner.

Replace XXXX Cartridge

The toner cartridge is empty. Replace it with a new toner cartridge.